Klipper-configuration Printer.cfg & Macros
Enhance your Klipper
If Klipper does not update information
press CTRL+F5 to clean the cache of the browser.
Download
Connect in SSH with Putty to your Raspberry or Armbian TVbox.
git clone https://github.com/Travis90x/Klipper-configuration.git
or update
cd ~/Klipper-configuration && git pull && cd -
Install
sudo chown -R pi: ~/printer_data
cp -r ~/Klipper-configuration/* ~/printer_data/config
sudo find ~/printer_data/config/config/scripts/ -type f -name "*.sh" -exec chmod +x {} \;
Printer.cfg
Copy the rows you need from printer.example.cfg in your printer.cfg
Moonraker.conf
add this in moonraker.conf to update klipper-configuration
[update_manager klipper-configuration]
type: git_repo
primary_branch: main
path: ~/Klipper-configuration
origin: https://github.com/Travis90x/Klipper-configuration.git
install_script: config/scripts/update/klipper-configuration/klipper-configuration.sh
managed_services: klipper moonraker
After updating, re-execute Install commands because install_script is deprecated
CPU LOG
sudo cp -r ~/printer_data/config/config/scripts/cpu/etc_systemd_system/* /etc/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable log_cpu.timer
sudo systemctl start log_cpu.timer`
USB
Automount and copy USB-KEY/gcodes in /home/pi/printer_data/gcodes
sudo apt install udisks2